Jacquard Dye-Na-Flow

$4.80$35.50

Jacquard Dye-Na-Flow is a free flowing, concentrated liquid colour for use on any untreated fabric.

It will spread on fabric until it is thoroughly absorbed and even.  Every fabric  has a different flow and spread.  It is magical on silk, but it works on any type of fibre, natural and synthetic.  On silk it has an even luster. On velvet it is rich. On cotton the colour does not alter the feel of the fabric.

Dye-Na-Flow is incredibly versatile. 70ml bottles only.

Instructions

Clear

Description

Jacquard Dye-Na-Flow is a free flowing, concentrated liquid colour for use on any untreated fabric.

 

It will spread on fabric until it is thoroughly absorbed and even.  Every fabric  has a different flow and spread.  It is magical on silk, but it works on any type of fibre, natural and synthetic.  On silk it has an even luster. On velvet it is rich. On cotton the colour does not alter the feel of the fabric.

Dye-Na-Flow is incredibly versatile. 70ml bottles only.

 

Instructions

 

Simply apply to pre-washed fabric with a brush, squirt bottle, sponge, or airbrush. Let dry. Iron fabric for 3 minutes on dry setting appropriate for fabric. Wash in cool water with Synthrapol and rinse. (Synthrapol is a mild soap for removing excess dye)

 

Resist technique

 

In the resist technique, lines are drawn on the fabric with Jacquard Water-Based Resist or Jacquard Gutta and the Dye-Na-Flow is applied within these lines. When painted on, the paints will flow and spread on the fabric until it reaches the resist lines. The resist acts as a boundary between colours much like lead in a stained glass window. These islands of colour can be blended, highlighted or accented with other colours.

 

1. Draw your design onto the fabric

2. Pour the water-based resist or gutta into a plastic applicator bottle with a metal tip.

3. Hold the resist bottle like a pencil. Gently squeeze the bottle until the resist begins to flow. It is a good idea to practice on a separate piece of fabric until you get the feeling of drawing smooth, flowing, continuous lines.

4. Begin drawing your pattern. Move steadily, but not so quickly that you leave gaps in your lines. All lines must be connected or the paint will bleed through the gaps in the resist line.

5. Once you’ve completed the design, carefully examine the lines. Make sure the resist has penetrated through to the back. Go back andfill in any gaps. Let the resist dry completely. Use a hair dryer to speed drying time.

6. Mix and apply the paint. Although Jacquard Dye-Na-Flow is available in 30 colors, you can also mix your colours. Using the colours full strength will yield the brightest shades. For less vibrant colours or for watercolour washes, the dyes can be mixed with water up to 25% water.

7. Dip your brush gently into a colour. Touch the brush to the fabric about 35mm from the resist line. The dye will migrate the rest of the way. Paint all areas inside the resist lines. For large areas, work quickly painting the colour from corner to corner. Always work wet to wet. Never go over a dry area.

8. After you have finished your piece, let dry completely. Heat set according to instructions.

 

Salt Technique

 

A beautiful starburst affect can be achieved by sprinkling salt over the fabric while the Dye-Na-Flow is still wet.

1. Paint, squirt or sponge the Dye-Na-Flow on the fabric in an all over pattern.

2. Sprinkle the salt onto the fabric. The salt should be applied immediately while the fabric is still very wet. The salt crystals will begin to soak up the dye as it dries.

3. Let the salt sit on the fabric until the paints are dry. Brush the salt off of the fabric.

4. Heat set the fabric according to the instructions.

 

Sun Printing

 

Make beautiful ghost-like images on fabric with simple found objects, leaves or paper cut outs. An easy, fun technique for kids and adults!

1. Using a brush thoroughly wet down the  fabric with clean water.

2. Apply Dye-Na-Flow onto the wet fabric.

3. While the fabric and paints are wet, arrange the paper cutouts, leaves and other items on the surface of the fabric. The closer in contact the object is with the fabric, the sharper your image will be. You may have to weigh down some objects so that they don’t blow away.

4. Set the fabric in the sun. (Depending upon the size of your fabric you may want to lay the fabric out in the sun before placing your objects on it. Just be careful not to let the fabric dry.)

5. Leave the fabric out in the sun with the objects on it for an hour or more. Remove the objects and you will see a lighter image in the shape of the object.

6. Heat set the fabric according to the instructions.

7. Wash in cool water with Synthrapol and rinse.

Additional information

Dye-Na-Flow Colour

Azure 70ml bottle, Black 70ml bottle, Brass 70ml bottle, Brick 70ml bottle, Bright Green 70ml bottle, Bright Orange 70ml bottle, Brilliant Red 70ml bottle, Brown 70ml bottle, Burnt Umber 70ml bottle, Cerulean Blue 70ml bottle, Chartreuse 70ml bottle, Claret 70ml bottle, Cranberry Red 70ml bottle, Ecru 70ml bottle, Emerald Green 70ml bottle, Golden Yellow 70ml bottle, Hot Fuschia 70ml bottle, Magenta 70ml bottle, Midnight Blue 70ml bottle, Ochre 70ml bottle, Periwinkle 70ml bottle, Pewter 70ml bottle, Salmon 70ml bottle, Scarlet 70ml bottle, Sulphur Green 70ml bottle, Sun Yellow 70ml bottle, Synthrapol 250ml, Teal 70ml bottle, Turquoise 70ml bottle, Violet 70ml bottle, White 70ml bottle, Waterbased resist clear 240ml, Waterbased resist clear 70ml, Waterbased resist Gold 70ml, Waterbased resist Silver 70ml, Gutta resist clear 120ml, Gutta resist Gold 120ml, Gutta resist Silver 120ml, Gutta resist Black 120ml, Jacquard Silk Salt 2oz