Sculpting Foam Blocks
$17.05 – $100.30
Used by Disney studios in the USA, high density expanded polystyrene EPS foam blocks are ideal for creating large lightweight sculptures. Glue together with Foam Fusion. Cut with Hot Wire Foam Cutters and then sand with rasps etc.
Foam surface can be sealed with Foam Coat Finish and then painted.
Replica stone-like and waterproof finishes can be achieved using Foam Coat Grit and Boost.
Add the grit to the foam coat finish to give texture.
Add the boost to the foam coat to give strength and waterproof for exterior use.
Please note the dimensions below are all in millimetres
Note:
If you are purchasing multiple quantities of foam blocks, additional postage charges will be incurred due to the volume of space and cartons required to pack and send. Please contact us for a freight quote.
- Description
- Additional information
Description
Used by Disney studios in the USA, high density expanded polystyrene EPS foam blocks are ideal for creating large lightweight sculptures. Glue together with Foam Fusion. Cut with Hot Wire Foam Cutters and then sand with rasps etc.
Foam surface can be sealed with Foam Coat Finish and then painted.
Replica stone-like and waterproof finishes can be achieved using Foam Coat Grit and Boost.
Add the grit to the foam coat finish to give texture.
Add the boost to the foam coat to give strength and waterproof for exterior use.
Please note the dimensions below are all in millimetres
Geelong and Melbourne it is $9.90 per large block but outside these areas it is very costly.
Happy to quote customers.
Additional information
| Please select | Foam Coat Boost 8oz, Foam block 225 x 305 x 315mm, Foam block 305 x 315 x 450mm, Foam block 315 x 450 x 615mm, Foam coat finish 3lb pack (covers 2.79sq.mt), Foam coat grit medium 3lb pack, Foam Fusion Glue 454ml |
|---|
